한국어

영어

FIXTURLASER NXA Ultimate

이름이 다 말해!

FIXTURLASER NXA Ultimate

FIXTURLASER NXA Ultimate를 사용하면 기계에 적용해야하는 모든 각도를 커버 할 수 있습니다. 여기에는 축 정렬 어플리케이션과 기하학적 어플리케이션이 포함되므로 이름에서 알 수 있듯이 궁극적 인 측정 도구입니다.

최적의 작동 조건을위한 최고의 측정 도구

샤프트 정렬 및 지오메트리 응용 프로그램을 혼합하여 기계 작동 조건을 보호합니다. FIXTURLASER NXA Ultimate에는 정기적 인 유지 보수 점검 또는 새로운 기계 설치가 필요합니다. 

기계가 실제로 설치되기 전에 평탄도 오류가 있는지 기계 기초를 확인해야하므로 평탄도 적용이 가능합니다. 그리고 일단 설치되면 기계의 정렬 상태를 측정해야합니다. 모든 것이 완벽하게 정렬 된 것으로 확인되면 장비의 최적 작동 조건을 보장 할 수 있습니다.

샤프트 정렬  

FIXTURLASER NXA Ultimate는 기능과 기능을 가능하게하는 기술을 제공합니다.

  • 초 고해상도의 CCD 검출기.
  • Bluetooth가 통합 된 새로운 센서 장치는 업계에서 가장 컴팩트하지만 30mm 검출기 표면 및 라인 레이저를 특징으로합니다.
  • The OmniView feature keeps track of the position of both the user and the machine to show the screen display from the user’s perspective, thanks to the built-in gyroscope (6-axis MEMS Inertial Motion Sensor) in the display unit.  
    OMNIVIEW – Shows the screen from the user's perspective
     
  • Ability to keep track of the position of the sensors in both the vertical and horizontal orientation, and any inclination in-between, when performing a shaft alignment, thanks to the built-in gyroscope in the sensor units. Hence, you are then able to perform a shaft alignment on vertically mounted machines where it is not possible to do a 180° shaft rotation.
  • Excellent power management – 10 hours on one charge.

Geometric Measurements  

FIXTURLASER’s laser-based geometry system is characterized by its user-friendliness and versatility, such as:  

  • The graphic user interface is intuitive and 3D animated, with icons and color-coded symbols to guide you throughout the measurement and alignment process.
  • Live values during measurement and simultaneous live adjustment, in both vertical and horizontal orientation (X and Y values), during the adjustment process.
  • Measurement results in micron resolution. 
  • Post-measurement evaluation means that you can process saved measurement results in order to choose the best reference. This will result in as few corrections as possible.

limited LIFETIME WarrAnty

​The FIXTURLASER NXA Ultimate has a limited lifetime warranty. Contact your local dealer for more details!

What's in the case?

 FIXTURLASER NXA Ultimate

FIXTURLASER NXA Ultimate
Package with Case

Display unit
2 pcs of digital smart sensors
2 pcs of complete V-brackets with chains
2 pcs of magnetic V-brackets
2 pcs of chains 8 mm 60 links
Rod kit
Extension fixture, 49 mm
Magnetic base
R2 sensor/receiver
Turnable sensor holder on magnetic base
T21 transmitter with mounting magnet
2 pcs of angled tools
Tape measure 5 m 
USB stick
Chargers for display unit and sensors
FIXTURLASER NXA Shaft alignment manual - English version
FIXTURLASER NXA Geometry manual - English version

Dimensions

 

NXA_dimensions

Technical specification

Fixturlaser NXA Ultimate

 

Weight including all standard parts

7,7 kg (17 lbs)

Storage temp

-20 to 70°C ( -4 to 158°F)

Long term storage temp

Room temp. 18 to 28°C (64 to 82°F)

 

 

Case

 

Material

High Impact ABS Plastic

Weight (empty)

2,5 kg (5,5 lbs)

Environmental protection

Dust-, Water- (5m), Air-tight with air pressure compensation valve

Drop-test (empty)

3m onto concrete floor

Storage Temp(empty)

-40 to +80 °C

Dimension

415 mm x 325 mm x 180 mm (16 in x 13 in x 7 in)

 

 

Display Unit

 

Housing material

Brushed Anodized Aluminum frame and high impact ABS plastic overmolded with TPE rubber

Operating temp

-10 to 50°C   ( 14 to 122°F)

Battery charging temp, system off

0 to 38°C   ( 32 to 100°F)

Battery charging temp, system on

0 to 32°C   ( 32 to 90°F)

Storage temp

-20 to 70°C ( -4 to 158°F)

Long term storage temp

Room temp. 18 to 28°C (64 to 82°F)

Relative humidity

10 – 90%

Weight

1,2 kg (2,6 lbs) with battery

Dimensions

124 mm x 158 mm x 49 mm (4,9 in x 6,2 in x 1,9 in)

Environmental protection

IP 65 (Dust-tight and protected against water jets)

Processor

1 GHz Dual-core main processor with ultra low power core for instant power management

RAM memory

256 Mb

Flash storage memory

8 Gb, >100 000 measurements

Display

Colour Reality Display, TFT-LCD backlit, sunlight-readable, with wide-angle viewing technology

Display size

6,5” (165mm) diagonal (133 x 100 mm)

Display resolution

Full VGA 640 x 480 pixels

Color depth

262 000 colors

Interface

6,5” High Impact Polyester laminated touch screen with enhanced transmission and reduced glare

Gyroscope

6-Axis MEMS Inertial Motion Sensor with drift compensation and automatic field calibration.

Peripherals – User accessible

1 USB 2.0 Master port (IP 67)
1 Power/Charger connector 10-14V DC (IP 67)

Peripherals – Distributor accessible

1 Ethernet 10/100BaseT RJ45
1 HDMI port (DVI compatible)
1 Service port

Wireless communication

Class I Bluetooth transmitter with multi-drop capability

Power supply

High performance, High-Temperature rechargeable Li-Ion battery or external power supply

Operating time

10 hours continuous use (with 50% LCD backlight)

Battery charging time (system off, room temperature)

5 h

Xpress battery charging time (system off, room temperature)

1 h charge – 5 hours operating time

LED indicators

Unit state and 2 x 5 battery state indicators with instant battery check

 

 

Digital Laser Sensors

 

Housing material

Anodized Aluminum frame and high impact ABS plastic overmolded with TPE rubber

Operating temp

-10 to 50°C   (14 to 122°F)

Storage temp

-20 to 70°C ( -4 to 158°F)

Long term storage temp

Room temp. 18 to 28°C (64 to 82°F)

Battery charging temp

0 to 40°C   ( 32 to 104°F)

Relative humidity

10 – 90%

Weight

192 g (6,8 oz) with battery

Dimensions

92 mm x 77 mm x 33 mm (3,6 in x 3,0 in x x 1,3 in)

Environmental protection

IP 65 (Dust-tight and protected against water jets)

Laser

650 nm class II diode laser

Laser line fan angle

Laser line width (1/e2)

1.6 mm

Laser line divergence (full angle)

0.25 mrad

Laser power

< 1 mW

Measurement distance

Up to 10 m

Detector

2nd generation digital sensor

Detector length

30 mm ( 1,2 in )

Detector angular subtense

30 mrad/m (3 mm/100 mm per meter)

Detector resolution

1 µm

Measurement accuracy

0,3% ± 7 µm

Signal processing

Digital signal processing with Sidespot rejection, edge detection, ambient light elimination, and anti-vibration mode

Ambient light protection

Optical filtering and digital ambient light signal elimination

Inclinometer:

Dual High-Performance MEMS inclinometers

Inclinometer resolution

0,01°

Inclinometer accuracy

±0,2°

Gyroscope

6-Axis MEMS Inertial Motion Sensor with drift compensation and automatic field calibration

Gyroscope accuracy

±1°

Total measurement axis’s (M3+S3 unit)

14

Wireless communication

Class I Bluetooth transmitter

Communication range

10 m (33 ft)

Peripherals – User accessible

1 USB Mini port (IP 67);
Charging: 5V, 0,5A
Communication: with separate USB/RS 485 adapter cable

Power supply

High-performance Li-Ion battery or external power.

Operating time

17 hours continuous use (measuring)

Battery Charging time (system off, room temperature)

8 h

LED indicators

Unit state, laser transmission and 5 battery status indicators with instant battery check

Laser safety*

 

   

Shaft brackets

 

Fixture

V-fixture with non-twisting chain, width 20 mm (0,79 in)

Material

Anodized aluminum

Shaft diameter

Ø 25-175 mm (1”-6.9”)
Ø 25-450 mm (1”-18”) (with extension chains)

Rods

4 pcs 100 mm (3,9 in) and 4 pcs 150 mm (5,9 in)
Extendable to 250 mm (9,8 in)

   

R2 Sensor (receiver)

 

Housing material

Anodized aluminum and ABS plastic

Operating temperature

0 to 50°C (32 to 122°F)

Storage temperature

-20 to 70°C (-4 to 158°F)

Relative humidity

10 – 90%

Weight

172 g (6.07 oz)

Dimensions

94 mm x 50 mm x 44 mm (3.7 in x 2.0 in x x 1.7 in)

Environmental protection

IP 65

Detector

2-axis PSD

Detector size

20 mm x 20 mm (0.8 in x 0,8 in)

Detector resolution

1 µm

Measurement accuracy

1% ± 3 µm

Ambient light protection

Optical filtering and ambient light signal rejection

Inclinometer resolution

0.01°

Inclinometer accuracy

±0.1°

Wireless communication

Class I Bluetooth transceiver with multi-drop capability.
BLE Bluetooth Low Energy (BT 4.0) and Classic Bluetooth.

Communication range

10 m (33 ft)

Connectors

1 USB Micro port (IP67)
Charging: 5V, 0,5A

Power supply

High-performance Li-Ion battery.

Operating time

12 hours continuous use

Battery Charging time (system off, room temperature)

8 hours

Battery Capacity

10.4 Wh

LED indicators

Unit state, battery status, and Bluetooth status.

   

T21 Transmitter

 

Housing material

Anodized aluminum

Operating temperature

0 to 50°C (32 to 122°F)

Storage temperature

-20 to 70°C (-4 to 158°F)

Relative humidity

10 – 90%

Weight

1150 g (2.54 oz)

Dimensions

100 mm x 103 mm x 109 mm
(3.9 in x 4.0 in x 4.2 in)

Laser

650 nm class II diode laser

Laser power

< 1 mW

Measurement distance

Up to 20 m (66 ft)

Laser sweep flatness

±0.02 mm/m

Angular prism accuracy

±0.02 mm/m

Spirit level resolution

0.3 mm/m

Power supply

2 batteries type LR6 (AA)

Warming uptime

10 min

Operating time

15 hours

Note:  Specifications are preliminary and subject to change without notice. 

Accessories

Fixturlaser Extension fixture

Fixturlaser Magnetic base

 

Extension Fixture, 49 mm
Extension Fixture, 94 mm

For mounting the measurement units in limited spaces.

Magnetic Base

For faster mounting on large diameter shafts

 

Magnetic Brackets

For limited space, where V-brackets with chains cannot be used.

 

 

 

 

Thin Chain Fixture

For mounting the measurement units in limited spaces.

Fixture for Non-Rotating Shafts

For machines with no or limited shaft rotation.

 

Protective foil for the display screen

Protects your display screen which will last longer.

 

 

          

Rod stabilizer

Used together with the extra-long rods.

Rod kit 4 x 100 mm

Can be used as extension rods.

Rod Kit

Extra-long rods in titanium, 2 x 250 mm and 2 x 500 mm.

 

Chain 8 mm 60 links

Can be used as an extension chain. Delivered with hooks.

 

Offset fixture and software

Complete set of fixtures and
software for alignment of offset mounted machines/cardan coupled machines.

OL2R fixture with software

For measurement of dynamic movements from offline to running conditions

 

FIXTURLASER ROP - the smart displacement probe

FIXTURLASER Level - for levelling machines or machine parts

 

FIXTURLASER ROP

A smart displacement probe for safe and reliable measurement of axial and radial runout.

FIXTURLASER Level

A measuring sensor used for leveling machines or machine parts during installation.

 

  

 

원본 텍스트